- Product
- Juniper QFX5210-64C-AFI
- performance
- - Throughput:12.8 Tbps
- Forwarding capacity : 4.2 Bpps
- Capacity
- - ID VLAN: 4096
- Groupes LAG: 64
- Ports membres maximum per LAG: 64
- Filtres Ingress Firewall (RACL, vacl, rules PACL): 768
- Filtres d'évacuation de Firewall (RACL, vacl, rules PACL): 1024
- Capacity d'routes IPv4: 262140
- Capacity de table d'host IPv4: 204750
- Capacity de Routing IPv6: 172016
- Capacity de table d'host IPv6: 102339
- Etrées ARP: 49000
- Tunnels GRE: 2040
- MPLS étiquettes: 32000
- MPLS IPv4 VPN L3: 2048
- Instances MSTP: 64 | VSTP instances: 509
- Mirroring ports de destination per switch: 4
- Maximum number of sessions: 4 mirroring
- Reflétant VLANs destination per switch: 4
- Files d'attente hardware QoS per port: 10
- MAC address table size
- 264000 entries
- Data link protocol
- Ethernet, Fast Ethernet, Gigabit Ethernet, HDLC, Frame Relay, PPP, MLPPP, MLFR
- Routing protocol
- OSPF, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, Static IP routing, GRE, OSPFv3, PIM-SSM, MLDv2, MLD, MPLS, transfert URPF
- Algorithme de chiffrement
- MD5, AES
- Protocoles VoIP
- SDP
- Ports
- - 64 x 100Gbits LAN QSFP28 / QSFP
- 1 x management RJ-45
- 1 x RJ-45 console
- 1 x USB Type A
- Power Over Ethernet (PoE)
- - PoE+
- Budget PoE : 740W
- Processor
- 2.2GHz
- RAM
- 16 GB SDRAM DDR4
- Disque Dur
- SSD 64 GB
- Flash memory
- 100 GB
- Remote management protocol
- SNMP 1, SNMP 2, Telnet, SNMP 3, SSH, CLI
- Standards compliance
- IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1ak
- Included software
- JUNOS
- Expansion slots
- 2 (total) / 2 (free) x Logement for extension
- Power supply
- CA 120/230 V (50/60 Hz)
- Power consumption
- 350 Watt
- chassis type
- 1U
