- Product
- Cisco Catalyst C9500-40X-A
- Features
- Compatible DHCP, support NAT, support PAT, liaisons, support de MPLS, IGMP snooping, support de Syslog, support of IPv6, Non-Stop Forwarding (NSF), Class-Basedd Weighted Fair Queuing (CBWFQ), Weighted Random Early detection (WRED), support protocole STP (Spanning Tree Protocol), support protocole VRRP (Virtual Route Redundancy Protocol), Quality of Service (QDS), Routing continu, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), NetFlow, support protocole HSRP (Hot Standby Router Protocol), Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Multicast Source Discovery Protocol (MSDP), Wireshark integrated, Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, support de VPN de layers 3 (L3VPN), support CoAP, Switched Port Analyzer (SPAN)
- Routing protocol
- OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS
- Capacity
- Entries de Routing table: 80000
routes IPv4 indirects: 212000
routes IPv4 hosts: 90000
routes IPv6 indirects: 212000
routes IPv6 hosts: 90000
scale de multicast: 32000
scale ACL QoS: 16000
scale ACL de security: 270000
Entries FNF: 96000
ID de VLAN: 4000 Interfaces virtuelles switched (SVI): 4000
- performance
- Switching capacity (full-duplex): 480 Tbps
Rate de transfert: 720 Bpps
- MAC address table size
- 64000 entries
- Ports
- - 40 x 10GBased-X SFP+
- 2 x USB 3.0
- Power Over Ethernet (PoE)
- PoE+
- Expansion slots
- 1 (total) / 1 (free) x Logement for extension
- Remote management protocol
- SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
- Processor
- 2.4 GHz
- RAM
- 16 GB
- Flash memory
- 16 GB
- Normes de conformité IEEE
- IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, IEEE 802.3bz
- Logiciel(s) inclus
- Cisco IOS XE 16.8.1
- system d'exploitation requis
- Cisco IOS XE 16.9.2 or supérieur
- Power supply
- device d'power supply: Power supply electrical interne - enfichable hot
Number installed : 2 (maximum)
Power supply redondante : En option
voltage requise: CA 120/230 V (50 - 60 Hz)
- chassis type
- Rack-mountable
